Product Description Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 °C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90 °, 110 °, 120 °, and other specifications, R-groove ranging from R0.2 to R25. Diameter φ1-φ500mm available. Product characters: Virgin raw material, fine processing, high precision, diamond polishing, wear resistance and long service life. Outer surface is as sintered, inner surface is crowned and diamond polished to 10 micro and no lines and steps to be seen. make sure no scratches when wires passing through the guides. Applications Mainly used in wire, cable, wire rope, cord, stainless steel screens and other production companies, can also be used in the textile, chemical and other industries. All polishing is in manual process,make sure ID is crownd and high polished!
Also your drawngs are warmly welcomed by our factory.
Carbide wire guide dies including Tungsten carbide wire guides Tungsten carbide bush Carbide bunching and stranding dies Tungsten carbide straightener dies
Main Grade for Tungsten Carbide drawing die nibs for drawing square metal bars:
For drawing non-ferrous metal wire and stainless steel wire etc.
For drawing steel wire and stainless steel wire etc.
For drawing nonferrous metal wire, steel wire, stainless steel wire. Good wear resistance and high toughness..
For drawing steel wire, stainless steel wire. Good general performance.
For fabricating drawing dies of steel tubes and rods under high compressibility ratio; punching, stamping, forging tools under large stress.